← Back

WC-6Co Thermal Spray Powder

  • Sintered and crushed powders are irregular.
  • The maximum service temperature is up to 500℃.
  • The dense coating has high hardness with excellent resistance to abrasive wear, fretting wear, adhesive wear, and erosion wear.
  • High fracture toughness.
  • Mainly used in mechanical parts, oil and gas equipment, metallurgical roller and pump seal, etc.

Grade & Chemical Composition

Grade

Chemical Composition (Wt, %)

W

T. C 

Co

Fe

O

ZTC41

Balance

5.2 – 6.0

5.5-6.5

≤ 1.0

≤ 0.5

Size & Physical Properties

Grade

Type

Size Fraction (μm)

Apparent Density ( g/cm³)

Flow Rate

(s/50g)

Application

ZTC41D3

WC – Co  94/6               Sintered & Crushed

-53

≥ 4

≤ 25

  • HVOF

(JP5000 & JP8000, DJ2600 & DJ2700, JetKote,

Woka Jet, K2)

  • Flame Spray
  • Cladding Cloth
ZTC4148

-38

≥ 4

≤ 25

ZTC4130

-150+75

≥ 4

≤ 25

ZTC4131

-150+63

≥ 4

≤ 18

ZTC4139

-106+45

≥ 4

≤ 18

ZTC4167

-106+53

≥ 4

≤ 18

ZTC4152

-45+15

≥ 4

≤ 18

ZTC4154

-38+10

≥ 4

≤ 25

We can tailor-make different particle size distributions and apparent densities for various applications.
Recommended Spray Parameters (HVOF)

Coating Properties

Material

WC – 10Co – 4Cr

Hardness (HV0.3)

1150 – 1400

Manufacturing

Agglomerated & Sintered

Bonding Strength (MPa)

> 70MPa

Size Fraction (µm)

– 45 + 15

Deposited efficiency (%)

40 – 55%

Spray Torch

JP5000

Porosity (%)

< 1%

Nozzle (inch)

6

Kerosene (L/h)

24

Oxygen (L/min)

944

Carrier gas (Ar) (L/min)

7.5

Powder feed rate (g/min)

70 – 80

Spraying distance (mm)

340 – 380